Description
Kluberfood NH1 34-401 is a versatile lubricating grease manufactured for operator or feed pellet presses. Made with a synthetic grease based on a special calcium complex thickener, the Kluberfood NH1-34-401 can be applied to various friction points, simplifying both initial and relubrication processes while helping to prevent product mix-ups.
The Kluberfood NH1 34-401 is also water resistant, with a low starting torque and very good adhesion. This combination allows the Kluberfood/NH1/34/401 to operate smoothly, even during start-up, which effectively reduces your maintenance expenses.
Kluberfood NH1 34-401 can be used for a variety of friction points, such as rolling/plain bearings, guides and open gears, subject to high loads, low to medium speeds and operating in the presence of moisture and steam. Further application examples include rolling bearings in animal feed pellet presses, hammer mills and slaughterhouses, open gears exposed to water and pneumatic control and sealing elements.
The Kluberfood NH1 34-401 can be applied with a standard grease gun, spatula or centralised systems. All points of lubrication should be thoroughly cleaned to ensure efficient hygiene when working with food-sage H1 lubrication.
Key Benefits For Your Application
Considerable Savings
Even under continuous exposure to high loads, only a low amount of lubricant is used.
Wide Range Of Applications
Purchase fewer lubricants for your machinery as the Kluberfood NH1 34-401 can be used across a range of different applications.
Low Breakaway Torque
Little resistance when re-starting standstill machinery, allowing it to start smoothly and efficiently every time.
Easy Application
Suitable for a centralised lubrication system so grease can be conveniently delivered to multiple touch points with minimal manual maintenance.
Product Information
Technical Data
Colour :
Beige
Benefits :
Excellent Wear Protection | Cost Saving | Low Breakaway Torque
Suggested Application :
Open Gears | Pellet Presses | Rolling Bearings
Operating Temperature Range :
-40°C (-40°F) to 140°C (284°F)
Size :
400g
DescriptionKluberfood NH1 34-401 is a versatile lubricating grease manufactured for operator or feed pellet presses. Made with a synthetic grease based on a special calcium complex thickener, the Kluberfood NH1-34-401 can be applied to various friction points, simplifying both initial and relubrication processes while helping to prevent product mix-ups. The Kluberfood NH1 34-401 is also water resistant, with a low starting torque and very good adhesion. This combination allows the Kluberfood/NH1/34/401 to operate smoothly, even during start-up, which effectively reduces your maintenance expenses. Kluberfood NH1 34-401 can be used for a variety of friction points, such as rolling/plain bearings, guides and open gears, subject to high loads, low to medium speeds and operating in the presence of moisture and steam. Further application examples include rolling bearings in animal feed pellet presses, hammer mills and slaughterhouses, open gears exposed to water and pneumatic control and sealing elements. The Kluberfood NH1 34-401 can be applied with a standard grease gun, spatula or centralised systems. All points of lubrication should be thoroughly cleaned to ensure efficient hygiene when working with food-sage H1 lubrication. Key Benefits For Your ApplicationConsiderable SavingsEven under continuous exposure to high loads, only a low amount of lubricant is used. Wide Range Of ApplicationsPurchase fewer lubricants for your machinery as the Kluberfood NH1 34-401 can be used across a range of different applications. Low Breakaway TorqueLittle resistance when re-starting standstill machinery, allowing it to start smoothly and efficiently every time. Easy ApplicationSuitable for a centralised lubrication system so grease can be conveniently delivered to multiple touch points with minimal manual maintenance. Product InformationSKU:kluberfood-nh1-34-401-400g AVAILABILITY:In Stock ✅ WEIGHT:0.4 kg Technical DataColour :Beige Benefits :Excellent Wear Protection | Cost Saving | Low Breakaway Torque Suggested Application :Open Gears | Pellet Presses | Rolling Bearings Operating Temperature Range :-40°C (-40°F) to 140°C (284°F) Size :400g | ||||||||
Bulk PricingFor bulk discount on this product, contact our dedicated sales team today by filling out the form below: | ||||||||
Delivery InformationWe have one of the largest stocks of bearings, lubricants and ancillary products available online anywhere in Canada. We take pride in our great customer service, quality products and express shipping. 98% of our products are typically dispatch same day, with a 1-3 day delivery to Canada. All of our website prices include any taxes and duties in Canada.
| ||||||||
